LM Test fit

18×8 et23 front 215/40

18×9 et17 rear 215/40


The final wet sand…

After working up through 220, 400, 600 wet, 800 wet, 1000 wet, 1500 wet, and finally 2000 wet; Rota #1 is ready for a high speed polish. Hopefully all comes out well and I don’t have to work back down at all. Stay tuned.

More from planet polish

Cleaned after being sanded with 400 grit, well on their way!


Rota’s; continued

Completely stripped and sanded down. I went down to 60 grit as there was some pitting; it helped but the pitting remains. I will work back up and see how the polishing process ends up.


Dimitri’s Rota Slipstream’s

These were already partly stripped, on their way to being polished. Stay tuned for updates.


RS6 Reps-Paint laid

I finally have 1 all done. I would give it a 7/10. There are some imperfections that (because I’m picky) I am not happy with. But, this is a learning process, and from 5 feet away you would not know they were anything less than perfect.

Now, 3 more to go…


RS6 Reps-Continued

Like I said, these wheels needed paint…step 1=primer.

The primer has been laid down. I will let them sit over night before I start some light sanding in order to smooth out some imperfections that didn’t quite show prior to being primed.